Ankor red oxide anti-corrosion primer 1 l

ANKOR alkyd primer 1 L Red oxide

CHEMSTAL is a Polish manufacturer, existing on the market since 1992. By deciding to purchase this paint, you only support the Polish economy!
A brand proven by us in the renovations we carry out ourselves.

ANKORis intended for anti-corrosion priming of steel and cast iron surfaces. It can be used under the following surface products: phthalate and oil enamels, modified phthalate enamels, chlorinated rubber enamels, styrene-acrylic enamels, acrylic enamels

METHOD OF USE

The substrate should be clean, dry and degreased before painting. Before painting before applying ANKOR, mix thoroughly and dilute to the required working viscosity (you can useNITROthinner) depending on the method of application. It can be applied by brush, spray or dipping. Use Styrene-Acrylic Solvent for dilution. Topcoats can be applied after 12 hours. The minimum dry coating thickness is 40-50µm.

For industrial use, please contact the manufacturer to adjust the product parameters to the technology used.

We also offerpolyurethane topcoat paints