Body protection agent + spray compound 2 in 1 BOLL 1 l - Gray

Body protection agent + spray mass 2 in 1 BOLL 1 l - Gray

Car body protection agent + spray mass 2 in 1 is a universal agent based on rubber and synthetic resins, which, by creating a flexible structural coating, protects body elements against mechanical damage and corrosion. , simultaneously acting as a sealing, anti-vibration and sound-absorbing mass. Used to protect thresholds, bumpers, spoilers against stone impacts and weather conditions, sealing joints between sheet metal and body elements, creating the structure of an original spray seal. It is resistant to water, oil and salt. Once dry, it can be covered with all varnish systems.

How to use:

Thoroughly clean, degrease and then dry the areas to be covered. Cover adjacent surfaces with paper. Before use, shake the container well for about 3 minutes. Clean the gun with white spirit after use. Do not spray on exhaust system, engine, gearbox or suspension components. The surface can be painted after approx. 3 hours. In the case of water-based varnishes - after approx. 24 hours.

• as a BODY PROTECTION: apply with a spray gun using a pressure of 3-6 bar from a distance of 25-30 cm. The final effect of the structure can be changed by adjusting the air pressure and the distance from the element to be covered. Optimal coating thickness: approx. 1 mm.
• as a SPRAYING MASS: apply with a spray gun using a pressure of 2-4 bar from a distance of 1-2 cm.

Physical properties:

• color: gray/black density (at 20oC ): 1.23 g/cm3
• solids content: approx. 54%
• temperature resistance: from -25oC to + 80oC
• drying time of the top layer (at 20oC) approx. 45 minutes
• complete drying time (at 20 oC) approx. 210 minutes
• boiling point: 111oC flash point: 4oC
• flash point: 450oC
• self-ignition: does not self-ignite
• explosion limits: upper: 7.0% vol. / bottom: 1.3 % vol