Professional 10 m drip irrigation set with pressure reducer (2 drip lines, 20 m hose, quick connectors, timer) / teger

PROFESSIONAL 10 m drip irrigation set with a pressure reducer (2 drip lines, 20 m hose, quick connectors, timer) / TEGER / is a comprehensive solution for irrigation of single plants in greenhouses or pots. Drip - capillary irrigation significantly speeds up and optimizes the watering process itself, which has a positive impact on the quality of the crops obtained and, moreover, allows for reducing water consumption costs. The set is easy to install, made of high-quality materials, and allows for even distribution of water and nutrients to the roots of each plant individually. Perfect for watering plants in greenhouses and pots. Recommendations: Measure and cut the required length of the watering pipe. We recommend leaving approximately 50 cm of free space at the end of irrigation. For the irrigation system to serve long, it should be used and stored at a positive air temperature. Attach the irrigation pipe to the ground using the pins included in the kit. If you want the capillary irrigation system to turn on and off automatically, we recommend installing an irrigation device controller at the beginning of the system. At the end of the irrigation season, all water must be removed from the irrigation system. Plant the plants and then insert the capillaries of the irrigation system into the ground next to them. For gravity irrigation, the water tank should be raised to a minimum height of 1 m above the irrigation site. If you use tap water, connect a water pressure reducer to the tap (included in the set).